市体上上安全使用较多的武汉伸降机有俩种，剪叉式和导轨式的。剪叉式可能投资回报的时间间隔较久有比较大的市场中占有率，而导轨式是近好久才受欢迎的一种生活国际货物伸降主设备。There are two kinds of Chengdu lifts, which are used in the market, and the scissors and the guide rail. Shear fork type as a result of a longer time to invest a larger market occupancy rate, and the guide rail is only a few years before the popular cargo lifting equipment. 而倘若合作方的在用到平率过高一段话，则不推荐在用到剪叉式升降梯机，这是哪些东西情况呢？And if the customer's use of the frequency is too high, then it is not recommended to use scissors fork lift, which is why? 因此剪叉式装备是经由自己的的折叠型回升和减少的，它每一个次回升和减少还是各联轴器区间内有做次破损，长日期的在使用，甚至候就要磨断联轴器，而这样就此开展更新，则会会造成软件平台的凸凹不平行，于是制造更好的破损。The scissor device is rising and falling through the folding itself, it each time the rise and fall of each bearing a wear, use for a long time, sometimes will wear off and bearing, if this replacement will cause the platform is not parallel, resulting in greater wear. 绵阳升降调节机生产商通知，如何联轴器损伤修改达到总量一半，则还是会构成专用生产设备车辆报废。以人们不提议实用的帧率较高的地段实用的此类类型的的专用生产设备。Chengdu lift manufacturers to remind, if the bearing wear and replace more than half, it will result in equipment scrapped. So we do not recommend the use of a higher frequency position to use this type of equipment.