昆明起降机选主要用在一下客运站啊、港口码头啊、大卖场啊、制造厂等其他区域，有朋友揭示购进的昆明起降机存在的偏摆現象，这是有什么主要原因呢? Chengdu lift is applicable to some stations, ah, docks ah, shopping malls, factories and other places, there are customers to reflect the purchase of the Chengdu lift the existence of partial swing phenomenon, which is why? 1.昆明起降机偏摆分前后控制控制时间一来一回偏移旋转和控制时间一来一回偏移旋转，因此夜压起降机的空间结构基本原理，前后控制控制时间偏摆物理现象较少见，没有你里主要的说的是控制时间偏摆。Chengdu elevator partial pendulum is divided into before and after swinging back and forth, as a result of the structural principle of hydraulic lift, partial swing phenomenon is very rare, here is mainly said that the left and right yaw. 2.佛山液压机调节机的摇动力度，根据调节宽度的发展无常而发展无常的，升的宽比越高调节机的摇动就可以越大。Chengdu hydraulic lift of the swing amplitude, with the change of the height of the lift and change, the higher the height of the lift will be the greater the swing of the mechanical. 3.上海升缩机偏摆高难度技巧超小，移动端时软件平台偏摆高难度技巧略大，其偏摆高难度技巧极大局限性为3-5cm。Chengdu elevator yaw rate is minimal, when the platform moves slightly larger amplitude, the maximum limit of 3-5 cm. 4.觉着到的窄幅度摆动旋转，这全是一切正常反方法人工无需惊慌失措，在这应该性高好上海升缩机的周围，升缩机禁止酒后开车超裁。Feel a small swing, this is the normal anti operator do not panic, at this time need to firmly around the Chengdu lift, lift is strictly prohibited overloading. 5.偏摆增长幅度过大应随时随时变慢广州伸降机的使用并切断电，请职业 朋友开始维护保养服务，坚决杜绝违规维护保养服务。Partial swing is too large, should immediately stop the operation of the elevator in Chengdu and disconnect the power supply, please professionals to repair, maintenance is strictly prohibited without permission. 郑州上升下降机的摇动升幅肯定始终维持在标准使用范围时间内，但无法漫没有心，察觉的问题要及时外理，清理掉安全性安全风险，让油缸上升下降机存放保量的成功上升下降选择题。 Chengdu lift the swing should be kept within the scope of the provisions, but can not be casual, found that the problem in a timely manner, clear security risks, so that the quality and quantity of hydraulic lift to complete the lifting operation.